Technology

Optical Design

AG optics uses a variety of design programs to drive precise and best optical design techniques.

Automotive Lens

  • - Black Box Camera
  • - ADAS Lens(Wide FOV, Narrow FOV)
  • - Logo Projection Lens
  • - CMS(Car Mirror System)
  • - ADAS VIS SWIR Lens
  • - LiDAR Objective Lens
  • - DSM(Driver Status Monitoring)
  • - Head lamp Lens Module
  • - In Cabin(RGB IR) Lens

Defense Application

  • - Long Wave IR(LWIR) Objective Lens
  • - Night Vision Binocular Objective Eyepiece Lens

Medical Application

  • - IR Lens (Thermography)
  • - Long Wave IR (LWIR) Objective Lens

Mold design technology

AG Optics offers optimal mold design, including efficiency, vitality, and cost savings,
through extensive experience and precise mold design techniques.

TECHNOLOGY

  • - Aspheric glass lens mold design
  • - Thermal simulation
  • - Plastic lens mold design
  • - Mold flow analysis

Processing technology

AG Optics brings together experts with the capabilities optimized for processing conditions to
produce the highest quality products through ultra-precision processing technology.

DTM

Diamond Turning Machine

  • Max Processing Size 400μm
  • Mode Core
  • Plastic Lens
  • Glass Lens
  • Aspheric & Freeform surface
  • Roughness 5nm

CNC

Computer Numerical Control

  • Max Processing Size 400μm
  • Mode Core
  • Plastic Lens
  • Glass Lens
  • Aspheric & Freeform surface
  • Roughness 5nm

Measurement technology

AG Optics uses measurement instruments that meet the conditions of each technology to provide accurate measurements.

PV Resolution 0.05μm
Geometric resolution 0.7μm
Measure range Ø400
PV Resolution 0.05μm
Geometric resolution 0.7μm
Measure range Ø400
PV Resolution 0.05μm
Geometric resolution 0.7μm
Measure range Ø400
PV Resolution 0.05μm
Geometric resolution 0.7μm
Measure range Ø400
PV Resolution 0.05μm
Geometric resolution 0.7μm
Measure range Ø400
PV Resolution 0.05μm
Geometric resolution 0.7μm
Measure range Ø400
PV Resolution 0.05μm
Geometric resolution 0.7μm
Measure range Ø400
PV Resolution 0.05μm
Geometric resolution 0.7μm
Measure range Ø400

Plastic Lens Technology

TECHNOLOGY

  • - Lightweight
  • - Quick production
  • - Aspheric & Freeform Surface
  • - Low Cost

Tolerance

Diameter < Ø10 mm Ø10 ~ Ø15 (mm) Ø10 ~ Ø25 (mm) Ø25 ~ Ø50 (mm) > Ø 50 (mm)
Profile error(PV) < 1 μm < 1.5 μm < 3 μm < 10 μm < 25 μm
Decenter < 2 μm < 2.5 μm < 5 μm < 8 μm < 15 μm
Center thickness
tolerance
< ±5 μm < ±10 μm < ±20 μm

GMP Molding Technology

Max processing size 100 mm Tolerance

ITEM Unit Ø 3~20 Ø 30~50
Design_PV µm 1.5 3.0
Best_fit PV µm 0.2 1
Thickness mm ± 0.01 ± 0.02
Outer diameter mm ± 0.005 ± 0.01
Surface Decenter mm 0.005 0.01
Surface Tilt Degree 0.03° 0.06°
Refractive index - ± 0.0005 ± 0.001

Optical Coating Technology

Introducing multi-layer coating for broadband and excellent coating technology with
minimal error rates such as various IR Cuts and UV Cuts.

TECHNOLOGY

  • - Anti-Reflective
  • - Half Mirror Coating
  • - Fast custom designs
  • - Reflective Coatings
  • - Dichroic Filter Coating
  • - in-house environmental testing
  • - Super Hydrophobic Coating
  • - Wavelengths from 193nm to 14 μm